Stick It Anchor Pin and Lanyard System Boat Accessory - 8ft

Stick It Anchor Pin and Lanyard System Boat Accessory - Stick It Anchor Pins are for use in shallow water and are recommended for flats boats up to 24 feet or bay boats up to 19 feet.

If you are fishing flats, shallow channels, sand bars, points and mangrove shorelines in 8 feet of water or less you can be assured of faster, quieter and stronger anchoring with the Stick Anchor Pins shallow water anchoring system.

The Stick It Anchor Pin 24in and 84in floating lanyard set are strong braided 3/8in dock lines with a 6ft loop on one end and a 1.5in loop on the other end of each lanyard. The smaller loop is for placing your anchor pin through. The larger loop is for attaching to your vessel on an anchor cleat, a trailer tie down cleat or a cross bar in a canoe. The idea is to have your lanyard pre-attached to your vessel before anchoring.

 Use the mounting clip set to easily store your Stick It Anchor Pin on your vessel. For best results install mounting clips about 1.5ft in from each end of your Stick It Anchor Pin. The stainless steel screws need to be seated to the base of the mounting clips so that the head of the screw sits down inside the body of the mounting clip

The Stick It Anchor Pin is so simple to deploy. Just attach it to your vessel with our floating lanyard and easily push it silently down to the bottom. Your boat will remain secure until you are ready to move to a different spot. No struggling with a heavy, muddy metal anchor! 

Included: 

8ft x 3/4in solid, reinforced resin anchor pin with a T-handle

24in braided 3/8in floating lanyard

84in braided 3/8in floating lanyard

2 x Mounting clips (3/4in C clips)

2 x Stainless steel screws

2 x Velcro rough water safety straps