Skip to content
ID 1932939 | MPN MPG464-LBT

Malone MicroSport LowBed Trailer

$2,669.40

Malone MicroSport LowBed Trailer - The MPG464-LBT MicroSport LowBed is a modified Base Trailer fitted with a 2nd Tier Kit. The trailer's bottom load bar supports have been redesigned to extensively lower the bar height. Now just 22in from the ground, the lower bars make loading and unloading heavy kayaks easier and much safer. These galvanized marine grade trailers can be backed down a boat ramp in order to launch directly into the water. Featuring submersible LED lighting and 78in lower load bars for up to six kayaks. The 2nd Tier has a 100 lb. load rating and provides transport for additional gear. The 50in upper load bars provide a comfortable height (58in) to access a cargo box, bike or boat. This 800 lb. load rated trailer is DOT and Transport Canada approved. Assembles in approximately three to four hours with standard tools. Five Year Warranty. Made in the USA.
Select a Shipping Method:
Explorewards Credit Card
Save up to $50 on your online order today!
Malone MicroSport LowBed Trailer

 

Malone MicroSport LowBed Trailer

$2,669.40

 
Back to top

Overview

Malone MicroSport LowBed Trailer - The MPG464-LBT MicroSport LowBed is a modified Base Trailer fitted with a 2nd Tier Kit. The trailer's bottom load bar supports have been redesigned to extensively lower the bar height. Now just 22in from the ground, the lower bars make loading and unloading heavy kayaks easier and much safer. These galvanized marine grade trailers can be backed down a boat ramp in order to launch directly into the water. Featuring submersible LED lighting and 78in lower load bars for up to six kayaks. The 2nd Tier has a 100 lb. load rating and provides transport for additional gear. The 50in upper load bars provide a comfortable height (58in) to access a cargo box, bike or boat. This 800 lb. load rated trailer is DOT and Transport Canada approved. Assembles in approximately three to four hours with standard tools. Five Year Warranty. Made in the USA.

Features

  • Pre-assembled hubs for a clean and simple installation
  • 12in galvanized wheels with marine grade sealed bearings
  • Reinforced steel tongue can transport boats up to 20ft in length
  • 78in steel, 1 ¼in square load bars featuring d-ring tie-downs
  • 50in steel, 1 ¼in square upper load bars w/ 2nd Tier Kit
  • 11 gauge pre-galvanized steel construction for years of service
  • Made in the USA
  • Five Year Limited Warranty

Specifications

  • Load Capacity: 800 lb / 20ft canoe or kayak
  • Dimensions: 13ft 3in (length)
  • Width (Without crossbars): 55in
  • Frame Width Assembled (Width within Fenders): 40in
  • Weight (Without accessories): 197 lb
  • Frame: Marine grade galvanized steel
  • Hitch: 2in Class II receiver
  • Required Ball Size for Vehicle Attachment: 2in
  • Ball Height: 18in From Ground - To Top Of Ball
  • Recommended Tire Pressure: 35 to 40 PSI
  • Tongue Weight (Unloaded): 25 lb
  • Lower Cross Bar Spread (Adjustable): 44in – 63in
  • Height of Upper Cross Bars from Ground: 58in
  • Height of Lower Cross Bars from Ground: 22in

What’s In The Box

  • (1) MPG474 2nd Tier Kit
  • (2) 12in High Speed Wheels
  • (1) Reinforced Steel Tongue
  • DOT Approved LED Lighting
  • Pre-Tested Electrical System
  • Pre-Fitted Chassis Components
  • (1) Instruction Manual & Registration Documentation
  • Total Shipment: 5 Cartons

Specifications

Capacity 800lbs
Model MPG464-LBTS
Dimensions 13ft 3in x 55in
Type Trailering

Reviews

Questions & Answers