| Labor – per man hour | $80 |
| Labor – per machine hour | $100 |
| Re-assembly of firearms (labor only) | $75 |
| Diagnosing | $45 |
| Written appraisals – (per gun) | $35 |
| Field strip and clean | $29 |
| Deep Clean Service | $80 |
| Deep Clean Service – Double Barrel Shotguns | $125 |
| Law Enforcement Inspection | $35 |
| Reliability work .75 Hr labor | $100 |
| Cosmoline removal 2 Hr labor (Rifle) | $200 |
| Cosmoline removal 1 Hr labor (pistol) | $100 |
Service
Barrel
| Check Headspace | $20 |
| Chamber cast | $50 |
| Remove stuck fired case*** | $50 |
| Remove live round*** | $99 |
| Remove bore obstruction*** | $50 |
| Install rimfire liner (+liner cost) Requires refinish, additional cost | $225 |
| Install Centerfire liner (+liner cost) Requires refinish, additional cost | $325 |
| Cut and crown barrel*** | $100 |
| Fit and Chamber barrel to action (+ blank) Requires refinish, additional cost | $275 |
| Recontour barrel, Requires refinish, additional cost*** | $220 |
| Contour (+ blank) Requires refinish, additional cost*** | $265 |
| Install pre-threaded / short chambered barrel | $175 |
| Lap bolt lugs | $65 |
| Install Sako or m-16 extractor (Includes parts) | $180 |
| Weld on new bolt handle (+ desired parts)*** | $150 |
| Bolt – Install thread-on bolt handle | $135 |
| Blueprint Bolt Action Receiver | $275 |
| Trigger job – Factory* | $75 |
| Install Aftermarket triggers with setting* | $75 |
| Install muzzle brake or suppressor on pre-threaded barrel | $35 |
| Thread muzzle for brake or suppressor** | $129 |
| Thread muzzle for brake or suppressor with matching cap** | $160 |
| Pin-Weld (+ desired brake or flash hider) | $85 |
| Barrel Threading- AK, BAR, Lever gun | $250 |
Cerakote
| Scope (Solid)***** | $200 |
| Scope (Pattern)***** | $250 |
| Scope Base / Iron Sights (Each) | $25 |
| Scope Base / Iron Sights (1 piece Cantilever) | $50 |
| Service | $00 |
| Scope Rings (Solid) | $25 |
| Scope Rings (Pattern) | $60 |
| Magazine (Solid) | $25 |
| Magazine (Pattern) | $50 |
| Small Parts (Solid) | $25 |
| Custom or specialized work | $110 |
| Semi-Auto Rifle – 1 Color | $350 |
| Semi-Auto Rifle – 2 Color | $415 |
| Semi-Auto Rifle – Intricate/Camouflage pattern (Freehand)*** | $500 |
| Semi-Auto Rifle – Intricate/Camouflage pattern (Stencil)*** | $550 |
| Stock / Forend / Grip AR/AK Set- 1 Color | $200 |
| Stock / Forend / Grip AR/AK Set – 2 Color | $265 |
| Stock / Forend / Grip AR/AK Set – Intricate/Camouflage pattern (Freehand)*** | $300 |
| Stock / Forend / Grip AR/AK Set – Intricate/Camouflage pattern (Stencil)*** | $350 |
| Tumbler 20 oz. / 30 oz. (Solid) with font | $45 |
| Tumbler 20 oz. / oz. (Pattern) with font | $66 |
| Tumbler Distressed | $15 |
| Tumbler Stencil Work*** | $35 |
| Pistol Slide only – 1 color | $100 |
| Pistol Slide only – 2 color | $135 |
| Pistol Slide only – Intricate/Camouflage pattern (Freehand) | $175 |
| Pistol Slide only – Intricate/Camouflage pattern (Stencil) | $200 |
| Handgun – 1 Color | $185 |
| Handgun – 2 Color | $200 |
| Handgun – Intricate pattern | $250 |
| Specialized finish – Metallic , pearl, iridescent over Cerakote | $50 |
| Clear (Gloss or Matte) over existing Cerakote or hydro dipping work | $100 |
| Micro slick bolt or carrier group (Black) | $35 |
| Suppressor (1- color) | $65 |
| Suppressor (Multi-color) | $85 |
| Distressed (Handgun) | $30 |
| Distressed (Long Gun) | $60 |
| Standard Long gun – 1 Color (All metal parts – No stock) | $200 |
| Standard Long gun – 2 Color (All metal parts – No stock) | $265 |
| Standard Long gun – Intricate/Camouflage pattern (Freehand) (All metal parts – No stock)*** | $300 |
| Standard Long gun – Intricate/Camouflage pattern (Stencil) (All metal parts – No stock)*** | $350 |
| Standard Long gun – 1 Color (Stock only) | $100 |
| Standard Long gun – 2 Color (Stock only) | $150 |
| Standard Long gun – Intricate/Camouflage pattern (Freehand) (Stock only)*** | $175 |
| Standard Long gun – Intricate/Camouflage pattern (Stencil) (Stock only)*** | $200 |
Handgun
| Trigger Job – Single Action Revolver | $95 |
| Trigger Job – Double Action Revolver | $145 |
| Port Barrel | $175 |
| Chamfer revolver barrel | $45 |
| Chamfer cylinder barrel | $60 |
| Face receiver frame and re-install barrel (w/o refinish) | $175 |
| Re-barrel revolver w/factory barrel (labor only) | $100 |
| Re-barrel w/ custom barrel (Estimate available per job) | $200 |
| Straighten crane on revolver | $50 |
| Install ball detent- crane lock | $80 |
| Remove or modify hammer spur | $50 |
| Modify square butt to round butt frame | $100 |
| Semi-auto trigger work – Single Action | $90 |
| Semi-auto trigger work – Double Action | $150 |
| Aftermarket Trigger Install*** | $45 |
| Fit new barrel bushing on 1911 (Labor) | $70 |
| Fit new barrel on 1911 – Non Ramped Barrel | $100 |
| Fit new barrel on 1911 – Ramped Barrel | $160 |
| Fit new barrel on 1911 – Bull or Bushing less barrel | $140 |
| Polish feed ramp (Estimate available per job) | $50 |
| Open and modify ejection port (Requires refinish, additional cost) | $55 |
| Stipple Frame (Requires refinish, additional cost) | $150 |
| Fit new trigger and bow (Labor only) | $50 |
| Fit custom hammer to pistol (labor only) | $78 |
| Fit new safety (labor only) | $75 |
| Fit beavertail safety (labor only) – drop in style*** | $35 |
| Fit beavertail safety (labor only) – Frame modification and refinish required | $105 |
| Custom slide modification (Estimate available per job depending on work) | $119 |
| De-horn and break edges for carry (Requires refinish, additional cost) | $75 |
| Install Compensator (Labor only)*** | $100 |
| Fit custom slide (Labor only)*** | $175 |
| Rear dovetail non-standard (Starting at) | $75 |
| Polymer frame stippling standard | $100 |
| Colored frames | $125 |
| Undercut | $40 |
| Double undercut | $65 |
| Grip reduction | $150 |
| Accelerator cuts | $40 |
| Memory pads (Front Fram Stippling | $35 |
| Forward cocking serrations (starting at) | $109 |
Laser Engraving
| Metal / Plastic – NFA Engraving Per line (2 lines / 25 Characters) | $45 |
| Customer supplied logo (Vector Format) – Per Hour | $75 |
| Custom text ( 1 line / 25 Characters) | $40 |
| Stippling or texture *** (Estimate available per job at hourly rate) | $135 |
| Metal texture | $135 |
Metal
| Metal Finish – Bead Blast (Stainless steel) | $100 |
| Bluing – Reblue (Matte) | $150 |
| Bluing – Reblue (Standard Finish) | $185 |
| Bluing – Polished Blue | $225 |
| Bluing – Belgian Bluing*** | $250 |
| Bluing – Slow Rust Bluing*** | $600 |
| Restoration – (Estimate available per job at hourly rate) | $110 |
| Firearms Disassembly and Reassembly*** | $65 |
| Bluing – Parkerizing – Handgun*** | $150 |
| Bluing – Parkerizing – Longun*** | $200 |
| Jeweling – Bolt | $135 |
| Jeweling – Other Parts (Per hr.) | $135 |
| Polish (hourly) | $80 |
Muzzle Brakes
| Style #1 | $150 |
| Style #2 | $175 |
| Style #3 | $220 |
Plating
| Custom work – Services priced per request | $110 |
SAR Work
| Standard Maintenance rebuild – (Includes gas rings and springs) | $140 |
| Install trigger, test fit and function (Labor only) | $45 |
| Install forend (labor only) | $55 |
| Assemble complete upper*** | $55 |
| Tune Gas Port | $65 |
| Install and tune (Labor only) | $40 |
| Install new buttstock and buffer tube (Labor only) | $25 |
| Specialty Semi Automatic Rifle Work – Per Hour (Estimate available per job) | $110 |
Shotgun
| Change front of mid sight bead* | $25 |
| Lengthen forcing cone – Non-plated barrel (Each) | $80 |
| Lengthen forcing cone – Plated barrel (Each) | $110 |
| Lengthen chambers (Non-plated barrel – each) | $85 |
| Polish chamber | $55 |
| Raising dent in barrel striking (Requires refinish, additional cost)*** | $85 |
| Straighten or adjust barrel for point of impact*** | $65 |
| Re-solder rib (Requires refinish, additional cost)*** | $85 |
| Open or modify chokes (Non-plated bore) | $65 |
| Install screw in chokes (Non-plated bore – labor only) | $85 |
| Port Barrel (Each) | $145 |
| Re-fit hinge pin and lug*** | $225 |
| Shotgun loading gate modification (w/o refinish) | $150 |
Sight
| Sight Work – Sight In (Plus Ammo) | $75 |
| Sight Work – Bore Sight | $20 |
| Sight Work – Dovetail sight adjust | $41 |
| Sight Work – Drill and Tap (Per Hole) | $25 |
| Sight Work – Cut Dovetail (Per Cut) | $75 |
| Install front Sight – Screw on w/ existing hole | $25 |
| Install front Sight – Screw on w/ drill & Tap | $70 |
| Install front sight – soldered on | $90 |
| Barrel Band Install (+desired parts) | $90 |
| Cut slide for standard sights | $85 |
| Bury rear sight and cut dovetail | $150 |
| Install stake on sight (1911) | $45 |
| Install Night Sights | $45 |
| Install sights w/o machining*** | $50 |
| Install center bead / includes drill and tap | $45 |
| Pattern Shotgun (+desired ammunition selection)*** | $100 |
| Mount and Bore Sight | $35 |
| Lap Rings | $30 |
| Cut and lap rings | $75 |
| Open receiver holes to 8×40 | $80 |
| Re-cut base to fit receiver (Estimate available per job)*** | $120 |
Slide Alterations
| RMR / Red Dot Slide cuts | $150 |
| RMR / Red Dot Slide cuts Sig Sauer, M&P, CZ, H&K | $185 |
| RMR/ Red Dot Slide cut radius front and rear to match | $225 |
Stockwork
| Refinish – Standard (Hand Rubbed Oil) | $190 |
| Refinish – Filled (Hand Rubbed Oil)*** | $240 |
| Refinish – Spray on lacquer or Urethane*** | $135 |
| Re-cut Checkering*** | $200 |
| Glass bed action – Bolt Action (Action Only) | $90 |
| Glass bed action – Bolt Action (Full Length) | $140 |
| Glass bed action – w/pillars | $175 |
| Glass bed action – Aluminum bedding block | $125 |
| Glass bed action – M1 and M1A rifles | $175 |
| Fit wood or Synthetic inletted stock in addition to bedding costs | $55 |
| Install cross bolts (labor only) | $95 |
| Install recoil pad (+cost of desired style of recoil pad) | $70 |
| Install adjustable butt plate (+desired parts) | $95 |
| Sling swivel labor (Standard studs) – Parts additional cost | $35 |
| Sling swivels labor (Flush Mount) – Parts additional cost | $75 |
| Sling Swivels labor (Island Style) – Parts additional cost*** | $125 |
| Recoil reducer – No drill | $25 |
| Recoil reducer – drill stock and install – + cost of reducer | $65 |
| Recoil reducer – Graco or similar style | $175 |
| Adjustable comb – Install only – Parts additional cost*** | $200 |
| Repair cracked / Broken stock (Base price)*** | $80 |
| Install forend tip (Labor only)*** | $80 |
| Reshaping stock (Estimate available per job) | $80 |
Test Fire
| Standard Ammo | $12.50 |
| Exotic Ammo* (Some cartridges will be quoted per round) | $16 |
Action
| Action Job Bolt Gun 1 Hr labor | $125 |
| Action Job Lever Gun 2 Hr labor | $175 |
| Action Job Revolver Gun 1.5 Hr labor | $150 |
| Trigger job Lever gun 1.5 hours | $125 |
POR = Pricing On Request | *FSP not available in all states
Contact us at (801) 304-8070 or email [email protected]
All prices are subject to change without notice.